Quick answer

Start with what is printed on the truck and trailer, then read the Texas crash report (CR-3). Its commercial vehicle section can list the carrier's name, ID number and address, and other parts of the report can list the owner or lessee, the driver, and any proof of financial responsibility shown at the scene. Use the USDOT or MC number to check the company in the federal SAFER snapshot. The company named on the truck may not be the only one involved.

Official source

FMCSA SAFER Company Snapshot. Search a carrier by USDOT number, MC/MX number or company name to see its federal record, free of charge.

After a crash with a big truck, the first question is often simple: who runs this truck? The answer is not always the name on the door. A truck can be owned by one business and leased to another. This page lays out the steps in order, so you can collect the names and numbers that point to the right company.

The steps work from the scene to the paperwork. Photos come first, because they record what was on the vehicles that day. The Texas crash report comes next, because the officer records carrier details there. Federal and Texas registration records then help you check what you found. A lawyer can take it from there.

Who owns the truck that hit me?

Short answer

The owner may be different from the company that was running the truck. The crash report can list both an owner or lessee and a carrier.

On the Texas crash report, the officer marks whether the person on the unit is the owner or the lessee, and records a name and mailing address for that owner or lessee. The report also has a separate carrier section with the carrier's corporate name. TxDOT's instructions to officers say the carrier is the entity responsible for operating the vehicle at the time of the crash. They add that this may or may not be the owner shown on the registration receipt.

So treat owner, lessee and carrier as three questions. Write down every name you find, and where you found it. Do not decide yet which one matters most.

  • Owner or lessee: check the report's owner and lessee fields; information may be missing
  • Carrier: listed in the commercial vehicle section of the report
  • Driver: listed as the first person on that unit
  • Financial responsibility: the provider's name, number and phone may appear if the driver showed valid or expired proof; the fields are left blank if no proof was shown
Two damaged vans parked on a grass lot

How do I find the trucking company after an accident?

Short answer

Work in this order: scene photos, the crash report, the carrier lookups, then a written request to the company through a lawyer.

Step 1 is photos at the scene, if you are able and it is safe. Step 2 is to get the crash report once it is filed. The officer completes the carrier section when a commercial vehicle is involved. Step 3 is to take the USDOT or MC number from the report and check it in the federal snapshot. Step 4 is to compare the report with what you photographed. If the names or numbers do not match, keep both versions.

If you were hurt and could not do any of this, that is common. A family member may be able to photograph the vehicles if they are still at the scene and it is safe to do so.

  • Photograph the truck and trailer
  • Get the crash report
  • Look up the carrier number
  • Compare names and numbers across sources
  • Speak with a lawyer before sending anything to the company

What should I photograph at the scene of a truck crash?

Short answer

Photograph every company name and every number you can see on the truck and the trailer, plus the license plates.

Walk around the whole rig if it is safe. Take wide shots, then close shots of each name, number or logo. A trailer may carry a different name than the truck pulling it, so photograph both, and take a photo that shows the truck and trailer together so the link between them is clear.

Also photograph the license plates on the truck and the trailer, any door or panel text, and any paperwork the driver hands you. Keep the exchange short and focused on collecting names and numbers.

  • Every company name on the cab, doors and trailer
  • Every number you can see, near each name
  • License plates on the truck and the trailer
  • The whole truck and trailer in one frame
  • The driver's name if offered, and any card or paper handed to you
  • The time and the location of your photos

What does the Texas crash report say about the truck and carrier?

Short answer

When a commercial vehicle is involved, the officer completes a commercial vehicle section that can include the carrier ID type, ID number, corporate name and primary address.

TxDOT's instructions to police say the CMV box is selected when a crash involves a commercial motor vehicle or other large vehicles. A CMV, by that definition, is one ordinarily used in interstate or intrastate commerce that meets one or more criteria: a weight criterion, transporting hazardous material, or a capacity of nine or more. The manual's weight identifier covers a vehicle or combination with a rating of 10,001 pounds or more. Buses and truck tractors always call for the CMV identifier. If the box is selected, the officer completes the CMV section of the CR-3.

The carrier ID type is a code: 1 for US DOT, 2 for TxDOT, 3 for ICC/MC, 96 for none and 98 for other. If a carrier has more than one number, the instructions say priority goes in this order: US DOT, ICC, TxDOT, then other. The instructions also say a USDOT or MC number is entered as 8 digits, with leading zeros if it is shorter. So the number on the report may look different from the one on the truck. The carrier fields are not required when the hit and run box is selected, so a report on a truck that left the scene may not have them.

Remember that the report is the officer's record. If a name or number looks wrong or is blank, check it against your photos and the lookups. To get a copy, see the site's crash report page for the steps.

How do I look up a USDOT number or MC number?

Short answer

Enter the number or the company name in the FMCSA SAFER Company Snapshot. The search is free and covers one carrier at a time.

The SAFER snapshot describes itself as a concise electronic record of a company's identification, size, commodity information and safety record. Users can search by DOT number, MC/MX number or company name. FMCSA also runs a Licensing and Insurance site. Its carrier search gives information about interstate for-hire carriers that have been granted authority or have applications pending.

Texas motor carrier registration has its own vehicle categories and exemptions. A vehicle's classification as a CMV on the crash report does not by itself establish that its carrier must register with TxDMV. TxDMV instructs carriers applying for Texas operating authority whose operations are exclusively within Texas to register with USDOT as intrastate. This page does not repeat the lookups. See the site's pages on the SAFER snapshot and the TxDMV motor carrier lookup for how to use each.

Pedestrian crossing a city street at a crosswalk in warm daylight

Why may the company on the truck not be the only responsible party?

Short answer

More than one business can be tied to a truck, such as an owner, a leasing company or a carrier.

TxDOT's instructions give examples of how roles can split. A truck owned and registered by a leasing company, but leased to a carrier and driven by that carrier's employee, is shown with the lessee's name. A truck owned by an individual and leased to a for-hire carrier is shown with the carrier as the motor carrier. A rental company's name is shown when a person rents a truck for a short-term move.

Whether any of these businesses is legally responsible depends on the facts and the law, which this page does not decide. What you can do now is collect every name that appears, and tell a lawyer about all of them. A lawyer can explain how each business may fit into a claim.

What evidence may a lawyer ask the trucking company to keep?

Short answer

A lawyer may send the company a written request to keep records and items connected to the crash. This page describes that only in general terms.

Which records matter depends on the crash. As examples only, a lawyer may ask a company to keep driver and vehicle records, trip and dispatch records, and any electronic data or video from the truck. A lawyer may also ask that the truck and trailer not be repaired or sold before they are inspected. These examples are not a list of what any rule requires a company to keep.

A lawyer can send a written request early in a claim. You do not need to send one yourself. See the site's page on evidence after a commercial truck crash for more.

Where do I find each name and number?

Short answer

Most of them are on the crash report. The federal and Texas lookups help you check them.

The table below sets out each identifier and where it appears. If a source is blank, that is a reason to ask, not to guess.

Where to find each identifier

Based on TxDOT's instructions to police for the CR-3 and the FMCSA SAFER snapshot page.
IdentifierWhere it appearsSource
USDOT numberCarrier ID number on the CR-3 when carrier ID type is 1 (US DOT). Search it in the SAFER snapshot.CR-3 commercial vehicle section; SAFER Company Snapshot
MC numberCarrier ID number on the CR-3 when carrier ID type is 3 (ICC/MC). Search by MC/MX number in SAFER.CR-3 commercial vehicle section; SAFER Company Snapshot
TxDOT carrier ID numberCarrier ID number on the CR-3 when carrier ID type is 2 (TxDOT). It is 10 characters long on the report.CR-3 commercial vehicle section
Company nameCarrier's corporate name on the CR-3. Search by company name in SAFER.CR-3 commercial vehicle section; SAFER Company Snapshot
Carrier addressCarrier's primary address on the CR-3.CR-3 commercial vehicle section
Owner or lesseeOwner or lessee box and name and address on the CR-3.CR-3 vehicle, driver and persons section
DriverName on the first line for that unit on the CR-3.CR-3 vehicle, driver and persons section
Financial responsibility shown at the sceneFinancial responsibility name, number and phone on the CR-3. These are left blank when the driver showed no proof.CR-3 vehicle, driver and persons section

Steps in order

A short checklist for the first weeks after a crash.
StepWhat to doWhy
1Photograph names, numbers and plates on the truck and trailerRecords what was on the vehicle that day
2Get the crash report when it is filedThe carrier section, owner or lessee details and names are there
3Search the number in SAFERChecks the company behind the number
4Compare every name you findOwner, lessee and carrier may differ
5Speak with a lawyerA lawyer can ask the company to keep records

What evidence proves it

  • Photos of every company name and number on the truck and trailer
  • Photos of the truck and trailer license plates
  • A copy of the crash report once it is filed
  • Notes of any names, numbers or cards the driver gave you
  • Printouts or screenshots of any lookup results, with the date

Mistakes that cost people money

  • Assuming the name on the truck is the only company involved
  • Waiting to take photos until the truck has left
  • Throwing out the driver's card or paperwork
  • Treating a blank or odd carrier number on the report as final instead of checking it
  • Sending your own demands to the company before talking with a lawyer

Frequently asked questions

Can the crash report be wrong about the carrier?

It is the officer's record, so it can have errors or blanks. If the carrier details look wrong, compare them with your photos and the lookups, and tell a lawyer.

What if the truck left the scene?

The carrier fields are not required on a report when the hit and run box is selected. Photos, plate numbers and witness details become more important.

Is the USDOT number the same as the MC number?

No. They are separate numbers, and the crash report has a code for each type. SAFER can be searched by either one, or by company name.

Do I need to look up the company before I call a lawyer?

No. Collect what you can, but a lawyer can run the lookups and send requests for you.

Does every truck have a USDOT number?

The crash report instructions say most carriers operating a commercial vehicle should be assigned an identification number by one or more agencies. If none is available, the officer selects none. If a number is missing, keep your photos of the truck and share them with a lawyer.

Who can get a copy of the crash report?

Texas law lists the people the department or governmental entity releases the information to, including a person involved in the collision and the owner of a vehicle or property damaged in it. Other people may request a redacted report. See the callout and the site's crash report page.

This page is general information about Texas law and is not legal or medical advice. Every case depends on its own facts. Contact the firm for a free review of yours.

Sources

Sources this page relies on

  1. TxDOT CR-100 Instructions to Police for Reporting Crashes (v29, 2025)
  2. FMCSA SAFER Company Snapshot
  3. FMCSA Licensing and Insurance public site
  4. TxDMV TxDMV Number
  5. Texas Transportation Code chapter 550 (Legislature text host)
  6. Texas Transportation Code chapter 643 (Legislature text host)